reubj Posted July 31, 2015 Share Posted July 31, 2015 Yes or no? Thanks in advance. Link to comment Share on other sites More sharing options...
HOrnbrod Posted August 1, 2015 Share Posted August 1, 2015 I use it on all the switches and sensors. Just 2-3 wraps (no more) around the threads is all it takes. Link to comment Share on other sites More sharing options...
Bobolink Posted August 1, 2015 Share Posted August 1, 2015 It's fine. The fan switch, unlike an oil pressure switch, doesn't operate by grounding a gauge or light, but closes the positive side of the circuit to the fan, so there is no path to ground through the threads on the switch. Link to comment Share on other sites More sharing options...
HOrnbrod Posted August 1, 2015 Share Posted August 1, 2015 ^^ You are correct - missed that it's a Renix with the rad hole bung switch the OP was referring to. But I do use teflon tape on sensors and switches that ground through the shell, always have. Just not to many wraps. Link to comment Share on other sites More sharing options...
reubj Posted August 1, 2015 Author Share Posted August 1, 2015 Thanks guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now