MississippiComanche Posted March 4 Share Posted March 4 Trying to find a bypass pulley for an 87 Renix MJ 2.5L 4cyl is like trying to find a unicorn. Anybody know of any pulleys or know any other solutions to delete the AC? Link to comment Share on other sites More sharing options...
eaglescout526 Posted March 4 Share Posted March 4 Yes, replace the whole bracket with just the alternator only bracket. I have one....shoot I think it has a idler pulley on it as well and I know I dont have one but yet have a couple brackets. Link to comment Share on other sites More sharing options...
MississippiComanche Posted March 4 Author Share Posted March 4 Do I need a shorter belt for that and where can I find the alternator only bracket? Link to comment Share on other sites More sharing options...
MississippiComanche Posted March 4 Author Share Posted March 4 Also does anyone have a picture of an engine bay with non-AC setup? Link to comment Share on other sites More sharing options...
eaglescout526 Posted March 4 Share Posted March 4 Yes you’ll need a shorter belt. Junk yard. 2.5L without AC is more common than with AC. I know I have a couple brackets but they’re missing the idler pulley. i can post a pic later but I know there’s a a few in my build thread too. Link to comment Share on other sites More sharing options...
MississippiComanche Posted March 5 Author Share Posted March 5 Is this the bracket and pulley? Says its for 2.5 4 cyl non ac Link to comment Share on other sites More sharing options...
eaglescout526 Posted March 5 Share Posted March 5 Yup! That’s it! Link to comment Share on other sites More sharing options...
MississippiComanche Posted March 5 Author Share Posted March 5 Do you know what belt length is required? Also I've been having a tough time finding the belt diagram for the 2.5 non ac. Do you know where I could find that? Link to comment Share on other sites More sharing options...
MississippiComanche Posted March 5 Author Share Posted March 5 I just found this. Assuming this is the pattern Link to comment Share on other sites More sharing options...
eaglescout526 Posted March 5 Share Posted March 5 19 minutes ago, MississippiComanche said: I just found this. Assuming this is the pattern Yes that’s it. I’ll grab the belt part number this evening for ya. Wait I have two of them actually. Both are lightly used. Probably under 500 miles if you want them. Link to comment Share on other sites More sharing options...
MississippiComanche Posted March 5 Author Share Posted March 5 Yea I'm definitely interested in the belts if they are for this configuration. I just ordered that pulley/bracket on eBay a few mins ago....haha only one on the internet and it was the last one. I had found one for an 86 on Facebook market..... the found this one on eBay.....and after a little more research discovered the 87-90 is different. Link to comment Share on other sites More sharing options...
eaglescout526 Posted March 5 Share Posted March 5 Shoot me a PM for the belts. They are set up for that config. I used to run that set up before finding the AC parts. Yes. 84-86 are totally different animals all their own. Link to comment Share on other sites More sharing options...
MississippiComanche Posted March 5 Author Share Posted March 5 I think I found the correct belt on Quadratec. https://www.quadratec.com/products/51213_12.htm Link to comment Share on other sites More sharing options...
(1)(1)(1)(1)(1)(1)(1)(1)(1)(1)(1)(1).thumb.jpg.cbd03b9af7e11340c1cb7d7e4a0d0c16.jpg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now