StevenH Posted December 8, 2007 Share Posted December 8, 2007 I am doing a leaf spring conversion and plan on using the lower control arm frame bracket. I tried an XJ leaf and the center pin location seems to be a good bit off, a CJ7 front leaf looks like it would be a perfect match but I want a longer spring than the CJ spring. Any ideas? I plan on front shackles and they will mount to the bumper which will be directly in front of the factory crossmember. Maybe I should ditch the idea of using the LCA bracket and make a new bracket for the spring? Link to comment Share on other sites More sharing options...
DirtyComanche Posted December 8, 2007 Share Posted December 8, 2007 New brackets would probably be more ideal. However, not running front leafs would work even better... I used waggy fronts. They worked. It was tall. Link to comment Share on other sites More sharing options...
Suuperman Posted December 8, 2007 Share Posted December 8, 2007 Stock 7 leaf waggy front springs OR YJ 4" front lift springs. Either wil work and get you about 6-7" of lift. http://www.floridajeepers.net/viewtopic ... t=comanche If this link doesn't work I think I can dig up the pics somewhere else and post them. Those are 35X15 TSL's. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now