Lookie here, Cabz new Rollbar

[Drahcir495]

:D You are going to need a bit of WD40, sockets w/ext, wrenches, and a pair of extra hands {or vice grips}. The bolts are not that bad. Should not be too bad to remove. Drum roll.....the pics

[Cabz]

:shock: :D SWEET , Will they let you drive up to it? I have onboard air in my YJ and some air tools too. :D

 

Will they pull it? by any chance?

[Drahcir495]

:shock: :D SWEET , Will they let you drive up to it? I have onboard air in my YJ and some air tools too. :D

 

Will they pull it? by any chance?

If they did, you may not be able to get close enuf to it and you would damage the YJs tires :shock: Mr. I have onboard air :P Call and ask if they would remove it. I really don't think it will be a problem to get it out. We would just have to lug it half way across the lot - Rich

[Cabz]

:shock: :D SWEET , Will they let you drive up to it? I have onboard air in my YJ and some air tools too. :D

 

Will they pull it? by any chance?

If they did, you may not be able to get close enuf to it and you would damage the YJs tires :shock: Mr. I have onboard air :P Call and ask if they would remove it. I really don't think it will be a problem to get it out. We would just have to lug it half way across the lot - Rich

 

Now your foilin my plan, :-D If I mess up the tires I get new ones :D

And I have OBA because a/cin a 4banger YJ with a soft top just don't work :P :D

I will call them monday and see if they will pull it, But I am not that lucky :evil:

[CWLONGSHOT]

CONGRATULATIONS!!!

 

GREAT find man!! Post up pics once its clean and installed!!

 

CW

[87manche]

that just makes me sad. Seeing how that one mounts just confirms that at one time I did have a facotry rollbar, and now it's gone, leaving only three screws in the fender wells as evidence.

[Cabz]

Well Looks like my plan has changed :( I have a line on an Ax 15 and tcase I realy need :evil: And it also looks like the D44 in my MJ has to be rebuilt :evil: :evil:

 

So I am going to have to pass on this one, I did measure the diffrence from the long bed to short bed versions .

The long bed is about 8" lionger from wheel well to bed wall than the shortbox. Since it is such a diffrence I probably couldn't bring myself to cut up a good rollbar on the chance I could get it to work and look good.

 

So Thanks for the find , Hopefully someone will getit before the crusher will.

But keep me in mind if ya see a LWB bar :D