Henry Evans Posted June 17, 2020 Share Posted June 17, 2020 New to this but I acquired a 88 Comanche Olympic Edition several months ago and in going through the front axle I have all the seals ready to go but I cannot find the O rings that go between the axle carrier bearings and the axle tube? Not really a true O ring as the ring is ribbed on 1/4 of it's circumference? I've been searching online with no luck. I attached a photo of the ring. The one in the photo is red. Mine were black. Link to comment Share on other sites More sharing options...
thecodemonk Posted June 17, 2020 Share Posted June 17, 2020 Isn't that just a Dana 30 inner axle seal? Searching for that might find you what you need.Sent from my Pixel 4 using Tapatalk Link to comment Share on other sites More sharing options...
schardein Posted June 17, 2020 Share Posted June 17, 2020 There is an inner axle seal that is replaceable. But there is also some sort of RTV used when the axle tube is assembled to the diff casting at the factory, and I think that is what is pictured. Link to comment Share on other sites More sharing options...
Henry Evans Posted July 24, 2020 Author Share Posted July 24, 2020 Thanks for the responses. It is RTV that is applied when the axles are manufactured. Had to put a bead in when I replaced. No leaks so all good. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now