Jeepingisfun Posted April 22, 2020 Posted April 22, 2020 hi guys its been awhile since i have made a post, last time i was talking about myy fuel not pumping, i took apart my fuel pump and sender and tested both on a car battery and it started pumping, i replace my old fuel relay with a new one, but it is still not flowing gas is it possible my ground wire behind the tail light is bad i looked at it and the connector was covered in dirt and other stuff and i can't remove the screw cause of how old it is anyreommendations on what to do?
Jeepingisfun Posted April 22, 2020 Author Posted April 22, 2020 so would i use the same ground wire or would i need to use a new ground wire for this to work?
JMO413 Posted April 22, 2020 Posted April 22, 2020 You technically add an extra ground. You run a new ground wire closer to the pump any tie it into the factory wiring.
Jeepingisfun Posted April 22, 2020 Author Posted April 22, 2020 ok i will try this and let you guys know if it works thank you
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now