WahooSteeler Posted July 2, 2018 Share Posted July 2, 2018 My blower motor resistor went bad a while ago and the blower motor had bad bearings in it so I finally got around to replacing them today. While my replacement blower motor has the hole for the vent tube that feeds air back in to the motor housing to help keep it cool, it's sitting at about 3 o'clock when it needs to be at 6 o'clock for the tube to go in to the hole where it collects the air. So the question is, how critical is it to have this setup? I.E. I'm tempted to just cover the hole with electrical tape instead of trying to fabbing up an extended tube of some sort. Thoughts? Link to comment Share on other sites More sharing options...
Ωhm Posted July 2, 2018 Share Posted July 2, 2018 Past posting: 700126 TYC - HVAC Blower Motor with hole on the wrong place. Link to comment Share on other sites More sharing options...
WahooSteeler Posted July 2, 2018 Author Share Posted July 2, 2018 Yay! Another suck had..........me! And like the past posting, I've had it too long to return, bought it last fall. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now