Jump to content

HVAC Blower Motor/Fan Question

Recommended Posts

My blower motor resistor went bad a while ago and the blower motor had bad bearings in it so I finally got around to replacing them today. While my replacement blower motor has the hole for the vent tube that feeds air back in to the motor housing to help keep it cool, it's sitting at about 3 o'clock when it needs to be at 6 o'clock for the tube to go in to the hole where it collects the air. So the question is, how critical is it to have this setup? I.E. I'm tempted to just cover the hole with electrical tape instead of trying to fabbing up an extended tube of some sort. Thoughts? :dunno:

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...