Dando Posted April 30, 2018 Share Posted April 30, 2018 I was driving on the highway yesterday and I’ve been trying to sort out some front end vibrations at speed. Well long story short the muffler (no cat/muffler right near crossmember) vibrates loose and fell off, then when I got home my starter had lost the top bolt and the bottom one was quite loose. What is the top bolts size so I can source a replacement? Also will thread locker stop these bolts from backing out as I continue to work out my vibration issues? Link to comment Share on other sites More sharing options...
cruiser54 Posted May 1, 2018 Share Posted May 1, 2018 I can't find it now but the one screwing into the bell housing is metric Link to comment Share on other sites More sharing options...
HOrnbrod Posted May 1, 2018 Share Posted May 1, 2018 Starter Bolts: Upper: 10mm x 1.5 x 25mm Lower: 3/8" x 16 x 1.5" Link to comment Share on other sites More sharing options...
Dando Posted May 1, 2018 Author Share Posted May 1, 2018 Amazing, thanks. I knew they were two different bolts but couldn’t get a concrete answer of which went in the top/bottom. Thanks so much. Off to the hardware store Link to comment Share on other sites More sharing options...
HOrnbrod Posted May 1, 2018 Share Posted May 1, 2018 12 minutes ago, Dando said: Amazing, thanks. I knew they were two different bolts but couldn’t get a concrete answer of which went in the top/bottom. Thanks so much. Off to the hardware store I'd replace them both since you're going to the hardware store anyhow. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now