HunterK Posted April 9, 2018 Share Posted April 9, 2018 Hey guys I need some help, I recently replaced my clutch along with replacing the master cylinder and slave cylinder. The only thing I didn't replace is the hose going between the master and the slave cylinder. It's an 89 with an ax15 swap, internal slave. I need to find a new hydrolic line for it but have no luck finding one. The line starts with a hard brake line and fitting that screws into the top of the master cylinder then takes a 90 degree bend and goes over the brake booster towards the center of the jeep then takes another bent towards the trans tunnel and turns into a flex line. When it reaches the bell housing it goes back to being a hard brake line and takes a 180 degree Bend and meets the slave cylinder lines coming out of the driver side of of the trans. I don't have any pictures of it at the moment but I will take them if needed. Anyone know where I can buy this hydrolic line? Or even get one used from someone on here? I tried searching all the local junkyards but couldn't find one. Thanks Link to comment Share on other sites More sharing options...
Eagle Posted April 9, 2018 Share Posted April 9, 2018 https://www.autozone.com/powertrain/clutch-hydraulic-hose?filterByKeyWord=clutch+hose&fromString=search&isIgnoreVehicle=false Don't even think about used parts for this. You'd be asking to get stranded with a blown hose. Link to comment Share on other sites More sharing options...
Jeep Driver Posted April 9, 2018 Share Posted April 9, 2018 7 hours ago, HunterK said: Hey guys I need some help, I recently replaced my clutch along with replacing the master cylinder and slave cylinder. The only thing I didn't replace is the hose going between the master and the slave cylinder. It's an 89 with an ax15 swap, internal slave. I need to find a new hydrolic line for it but have no luck finding one. The line starts with a hard brake line and fitting that screws into the top of the master cylinder then takes a 90 degree bend and goes over the brake booster towards the center of the jeep then takes another bent towards the trans tunnel and turns into a flex line. When it reaches the bell housing it goes back to being a hard brake line and takes a 180 degree Bend and meets the slave cylinder lines coming out of the driver side of of the trans. I don't have any pictures of it at the moment but I will take them if needed. Anyone know where I can buy this hydrolic line? Or even get one used from someone on here? I tried searching all the local junkyards but couldn't find one. Thanks Hydraulic. Any hydraulic shop can make you a new braided SS line with the correct ends to your specified length. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now