bhorocks Posted August 7, 2007 Share Posted August 7, 2007 ok, another question.. looks like i can swap a 700r4 from a 2.8l s10 into my 2.5 comanche. mY question is if anyone here has done it how do i run the vacuum lines to allow the transmission to shift? anyone done this? thanks. Link to comment Share on other sites More sharing options...
pingpong Posted August 7, 2007 Share Posted August 7, 2007 Not sure on this.. try contacting Novak, or Advance adapters to get more info. AA is very knowledgeable, they might even have a swap book you can buy that goes int detail about it Link to comment Share on other sites More sharing options...
86FUBAR Posted August 8, 2007 Share Posted August 8, 2007 What vac lines u talkn about , if memory serves me right there shouldnt be any vac lines fer the 700r4. just fab ur self a TV cable bracket off the tbi, adjust it properly and if its an electricaly opperated over drive then run a manual switch in to the cab to activate the OD . if there are any vac lines any on the engine then cap or remove as necesary. 700r4 are easy to adapt on to everything because they aint computerized Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now