DDC Posted October 17, 2017 Share Posted October 17, 2017 Hey guys Desperately Seeking brake line kit for 1988 Comanche with six foot short bed 7 foot seems easy to find 6-foot not so easy recommendations? Link to comment Share on other sites More sharing options...
Dzimm Posted October 18, 2017 Share Posted October 18, 2017 Just buy lengths of brake line from the autoparts store and bend them by hand. Just don't bent too tight to avoid kinks and you'll be fine. If it's flaring that you're worried about, just buy the pre-flared lengths and use splices to attach them. Many people say to not have any joints in the lines, but if you minimize the amount of splices, and you check them for leaks after install, they will be totally fine. Any "kits" you find will be at least a couple hundred dollars. Link to comment Share on other sites More sharing options...
Jeep Driver Posted October 18, 2017 Share Posted October 18, 2017 You're going to have to roll your own, don't see anyway around it. Get a coil and consider this http://www.eastwood.com/eastwood-handheld-tubing-straightener-3-16.html And a good flare tool. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now