Bed Shims

[AMC86Kid]

Ok so i took my bed off and repainted it and the frame 

now i want to put it back on and i remember where the shims go because i took a pic of it 

but there are different thicknesses on the shims and i don't remember exactly witch number thickness goes where 

 

does anyone remember or have a diagram that labels it ?

i will try to post the pic i have but tinypic servers have been acting up this whole month 

[AMC86Kid]

here's a link to my pic: https://ibb.co/fWWfHQ

[AMC86Kid]

Here is a pic of the Bed Shims:

 

 

There are a total of 10 

6 (Blue number 4)

2 (Black number 2)

and 2 (black number 4)

 

Notice the difference in thickness:

 

[JE39]

I would assume that they are meant to level the bed, so the swage lines line up perfectly. They are individual for every car from the factory. So you'd have to put the bed on an then see where it needs raising to meet the swage lines of the cab. Shouldn't be too hard to see, given how thick they are :) (make sure that car is on level ground)

[Cre8tive]

I'm doing the same thing ATM and I've done it this way I'm not 100% on this would be nice if some else could confirm!

 

Front driver        Front passenger 

 

blue #4                   blue #4

blue #4                   blue #4

black #2                 black #2

black #4                 black #4

blue #4                   blue #4

 

Rear driver          Rear passenger 

 

[AMC86Kid]

That might just work Cre8tive 

do you have a short bed or a long one ?

mine is the long one 

[Cre8tive]

It's a Short bed but same amount and size spacers 

[AMC86Kid]

ok i put them on like you said 

Link to pic: https://ibb.co/dD0eU5

now all i got to do is find someone that can help me put the bed on