dellstopjeep Posted February 19, 2017 Share Posted February 19, 2017 Still trying to find the e brake mechanism at the driver kick panel floor. Mine isn't salvageable.... Also still trying to source the spare tire mounting stuff for under the bed. Thanks! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
yellaheep Posted February 20, 2017 Share Posted February 20, 2017 I have one. Missing the crank tube but easy to make From galvanized conduit. Lemme know. Have pics of it. $45 shipped Link to comment Share on other sites More sharing options...
dellstopjeep Posted February 21, 2017 Author Share Posted February 21, 2017 Pics please? I'll probably take it though... thanks! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
yellaheep Posted February 21, 2017 Share Posted February 21, 2017 Link to comment Share on other sites More sharing options...
dellstopjeep Posted February 22, 2017 Author Share Posted February 22, 2017 I had this in my truck. Is this what your talking about? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
yellaheep Posted February 22, 2017 Share Posted February 22, 2017 Nope, that's not a jeep jack part at all. It's the tube that you'll see through the hole just below the tailgate. That tube goes back to the spare winch bracket assembly to that short shaft in the pic - the one with the hole drilled through it. The tube goes over that shaft and held in place by a cotter pin. The end you see below the tail gate has a bit of a pinch to the end where the flat blade end of the lug wrench goes - using the lug wrench to turn the tube and therefore lowering or raising the spare tire winch. Best pic I could find on the interwebz..... Link to comment Share on other sites More sharing options...
dellstopjeep Posted February 22, 2017 Author Share Posted February 22, 2017 I see. Well I still need the spare tire mount. So I'll take it Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
johnj92131 Posted February 22, 2017 Share Posted February 22, 2017 Yellaheep, Can you email me a couple of high resolution pictures of that cable end? I need to figure out what to use on the end of cable, so I can hold the spare tire in place. Mine broke off and I lost the old cable end. As I recall, it seemed to be a molded hard plastic? Any clue as to what would be a good substitute? My email: johnj92131@yahoo.com Link to comment Share on other sites More sharing options...
yellaheep Posted February 22, 2017 Share Posted February 22, 2017 What's posted here is as good as it gets. Seems to me, you might be able to use a urethane upper shock mount bushing and washer from an off-road style XJ/MJ front shock. I wouldn't use a black rubber bushing, probably too soft and those tend to crush over time. Link to comment Share on other sites More sharing options...
HunterK Posted February 23, 2017 Share Posted February 23, 2017 i have a good parking brake assembly i'm willing to sell. Link to comment Share on other sites More sharing options...
dellstopjeep Posted February 23, 2017 Author Share Posted February 23, 2017 i have a good parking brake assembly i'm willing to sell. I want! Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts