Front air bumps

[cody4359]

Been watching some wheeling videos and getting anxiouse to be home and get the jeep.some work done. As of now.i need to trim the front fenders a bit and ad extended bumpstops. I have some UHMW I've gotten setup for mounting on the axle, but now.i want something a bit nicer.

 

I have been browsing and haven't found what I've been looking, and I'm away from the jeep to take pics or try visualizing. I'd like a airbump running off the unibody rail to the rock krawler control arm. I habe found a few kits that mount the cans from the orignal bumpstops can, but I habe ACOS spacers, and have read that during flex you can rub on the coil.

 

Does anyone have a link saved or ideas for adding front airbumps cleanly?

 

Sent from my SM-G900V using Tapatalk

[89eliminator]

why can't you mount it to the unibody?  thats what I'm gonna do when i get my air bumps.  

[daking]

I wanted air bumps on my MJ. I ended up going with Prothane Ring Coil Spring Inserts instead. Less failure points. 

 

http://www.amazon.com/Prothane-19-1705-Ring-Spring-Insert/dp/B00387A83G/ref=sr_1_1?ie=UTF8&qid=1461133037&sr=8-1&keywords=Prothane+19-1705

 

Note red in the coil

Image Not Found

 

Image Not Found

 

I went with timbren bumps in the rear. They compress very well, and add a soft rate. 

 

Image Not Found

 

 

However, if you do go air bumps, make sure to post pictures. 

[cody4359]

How much room dp you have with the red inserts to the bump on the acos? I think I habe 4.5" springs plus acos and if memory serves me right the UHMW bumps I made were 6 or 7" long. Compressible would need to be longer

 

Sent from my SM-G900V using Tapatalk