Jeepjeff859 Posted August 26, 2015 Share Posted August 26, 2015 I'm finishing up my electrical and trying to get it to start, when I turn the key nothing happens, I tested and I'm getting almost 13 volts to the starter relay, if I jump the terminals on the starter it moves, I have the NSS by passed with a jumper, any ideas Link to comment Share on other sites More sharing options...
shelbyluvv Posted August 26, 2015 Share Posted August 26, 2015 Try to adjust the ignition switch Link to comment Share on other sites More sharing options...
Jeepjeff859 Posted August 26, 2015 Author Share Posted August 26, 2015 What do you mean by adjust it Link to comment Share on other sites More sharing options...
shelbyluvv Posted August 26, 2015 Share Posted August 26, 2015 There are two nuts on the bottom of the column that hold the ignition switch in. You can remove it completely and shove a screwdriver in the middle to see if it will crank. Link to comment Share on other sites More sharing options...
Jeepjeff859 Posted August 26, 2015 Author Share Posted August 26, 2015 Figured it out, NSS wasn't correct, now on to the fuel system Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now