4.0 swap no start

[Jeepjeff859]

I'm finishing up my electrical and trying to get it to start, when I turn the key nothing happens, I tested and I'm getting almost 13 volts to the starter relay, if I jump the terminals on the starter it moves, I have the NSS by passed with a jumper, any ideas

[shelbyluvv]

Try to adjust the ignition switch

[Jeepjeff859]

What do you mean by adjust it

[shelbyluvv]

There are two nuts on the bottom of the column that hold the ignition switch in. You can remove it completely and shove a screwdriver in the middle to see if it will crank.

 

[Jeepjeff859]

Figured it out, NSS wasn't correct, now on to the fuel system