89JeepMJ Posted February 24, 2015 Share Posted February 24, 2015 Lines need to be replaced. Want to do them in those build it yourself lines. With the blue and red fittings. Made by crown? I think. Just wondering if anybody has done this and send pics. Wondering the thread size on the tranny and radiator too Link to comment Share on other sites More sharing options...
Dando Posted February 24, 2015 Share Posted February 24, 2015 On the ones I'm currently putting together while I wait for spring to come the fitting size on the trans is 14mm x 1.5 going to -6AN hose adding an oring between the new fitting and the trans. The fittings I think you are talking about are generically called AN Fittings, made by many different manufacturers. Not sure on the fittings sizes on the radiator and stock cooler though as it hasn't been warm enough to investigate it yet. Link to comment Share on other sites More sharing options...
HOrnbrod Posted February 24, 2015 Share Posted February 24, 2015 They are called AN fittings. You will need to adapt the 14mm AW4 fittings with the following: http://www.jegs.com/i/Russell/799/670520/10002/-1 Link to comment Share on other sites More sharing options...
Incommando Posted February 24, 2015 Share Posted February 24, 2015 ^^^^ Another excellent post. Thanks for all you do. Link to comment Share on other sites More sharing options...
89JeepMJ Posted February 24, 2015 Author Share Posted February 24, 2015 That's exactly what I was looking for! Is there a special kindof line just for the tranny fluid because I know they have fuel lines and everything made from them. Link to comment Share on other sites More sharing options...
HOrnbrod Posted February 24, 2015 Share Posted February 24, 2015 Good site to learn from here: http://www.anplumbing.com/ Link to comment Share on other sites More sharing options...
89JeepMJ Posted February 24, 2015 Author Share Posted February 24, 2015 Okay thank you. Link to comment Share on other sites More sharing options...
89JeepMJ Posted February 25, 2015 Author Share Posted February 25, 2015 I got everything I need besides the fittings for the radiator. I got some ideas but the thread on the radiator would be extremely helpful. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now