Rust repair

[ownedueasy]

Ok I have a little rust in my 92 mj on the drivers rocker and the floors both... I was wondering where the best place to get the replacement parts from that fit correctly and look right. I found some and was wondering if they're correct. If not please give some input where you have gotten some replacements from

 

Rockers- http://www.andysautosport.com/products/classic_2_current__070-020-1.html

 

Floors- http://www.andysautosport.com/floor_pans/jeep_comanche/1992.html

[91Pioneer]

There was a discussion on this exact topic last week, those are both crappy in terms of fitment, do not buy C2C.

[joester1908]

I bought floors online. I got the C2C ones. They fit ok, but I had to cut them vertically and bend them in to place. Check out my build thread its one of the first things I do.

[joester1908]

As for rockers, id cut them out and make sliders. :thumbsup:

[87Warrior]

The C2C pan is built on a brake out of great metal. However, it fits like a square peg in a round hole. I have never installed a Sherman pan but have used Sherman rocker with good results. I have installed a Raybuck pan, which looks like Sherman in pictures. The Raybuck pan is pressed and fits darn well, is made of decent metal and includes the most 'tranny tunnel' metal of all pans I've come across.

 

Note: Regardless of what a manufacture claims, there are NO MJ specific pans or rockers available. They are all XJ parts that may need modified to fit.

[joester1908]

Yes, and no one makes the floor brace either.