johnj92131 Posted October 5, 2014 Share Posted October 5, 2014 Found a 92 Comanche in a J.Y. today with a frame mounted trailer hitch like I have not seen before. This hitch was bolted to the bottom of the frame rails like on the WJ. Not to the bumper mount points like a normal Comanche. Also the cross tube was rectangular rather than the normal square tubing. Finally the receiver tube had been welded to the stock MJ bumper where it was normally bolted. Unable to remove the hitch because the bolts were just spinning (nuts not holding in place in the frame tube. Any thoughts on how I can get this off with hand tools in the Junk Yard? I did get a straight tail gate off the truck. I left a solid one piece rear window and a bench seat in the truck. Did have a 5 speed attached to the 4.0. Some Gray interior plastic and B pillar lights were left. Bed is trash. Also scored a windshield washer bottle and pump from a 97 Cherokee that will replace the leaking windshield washer on my 91 Comanche Link to comment Share on other sites More sharing options...
dave92cherokee Posted October 5, 2014 Share Posted October 5, 2014 Was the fuel sending unit still in the tank? If so I'd like to talk about you getting it for me and possibly shipping it to me. Link to comment Share on other sites More sharing options...
johnj92131 Posted October 5, 2014 Author Share Posted October 5, 2014 Dave, Gas tanks are always removed before the cars hit the yard. Gas is drained properly and tanks are scrapped before they hit the yard. Link to comment Share on other sites More sharing options...
SW86 Posted October 5, 2014 Share Posted October 5, 2014 Snag that vin number and post it up if you don't mind. Link to comment Share on other sites More sharing options...
sloride Posted October 5, 2014 Share Posted October 5, 2014 Battery powered Sawzall (reciprocating saw) to cut bolt heads off? Some JY will let you take saw in while others will cut off it off for you. I'd ask the JY yard guys to help you get it off. Link to comment Share on other sites More sharing options...
johnj92131 Posted October 5, 2014 Author Share Posted October 5, 2014 Snag that vin number and post it up if you don't mind. VIN# 1J7FT26S2NL107544 Year first sold 1991, Mod year 1992 2 wheel drive 5 speed transmission Dana 44 rear end. no metric ton - 3 leaf springs plus 1 overload. Hand brake gone. 4.0 engine and trans still there. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now