Fierokid87 Posted April 18, 2014 Share Posted April 18, 2014 Hey all, I have mainly been just lurking and watching and surfing since I was first looking for my first car. And well, I eventually got a hold of a Fiero from my dad, and while thats a different project, I ended up stumbling onto a 1990, 4.0, 5-Speed, NP231 Sport truck and for 700 I couldnt pass it up. I bought it in October of last year and got to drive it for a month before my LCA bracket on the axle broke off as i was getting off the freeway by my house. I ended up parking the truck while i hunted down a new axle (I wanted to get rid of the CAD system). And while it was sitting, i just kept acquiring more parts to do, and made my to do list longer and longer. Well as of now Its getting: Beijing 2500 Front End Painted Flat white (Rustoleum spray can so scratches won't kill me) with Semi-Gloss Black trim Roof Rack + LED lights (have a 42" Bar already) Custom Front and rear Bumpers with Dual Hidden 12K Winches (Overkill, I know) Custom Rock Sliders And a Claytons Offroad 3-Link upfront and I'm not to sure how much lift itl actually be and a Spring over in the rear 97+ Power Doors/Mirrors So far I have the front end installed and still deciding how to do my front fenders And while I'm doing that my dad is helping out and putting rebuild-able hinges from the 97+, We had to replace the drivers side Door striker area so its got the 97+ door jamb/Striker plate welded in. And the Passenger side will be done to match. I have a lot of the body sanded down ready for paint, I have the new drivers door painted and reassembled and the colors go good together. I don't have any pictures yet, but Ill throw some up tomorrow of my progress... This thread is mainly for me to track my progress and keep track of what parts are from what type of thing, but I figured others may enjoy watching this. Link to comment Share on other sites More sharing options...
Spectormj Posted April 18, 2014 Share Posted April 18, 2014 :needpics: Link to comment Share on other sites More sharing options...
Spectormj Posted April 18, 2014 Share Posted April 18, 2014 sounds pretty cool but the hell is the 2500 front clip Link to comment Share on other sites More sharing options...
Fierokid87 Posted April 18, 2014 Author Share Posted April 18, 2014 I'll throw some pics up tonight after I've gotten more work done. Link to comment Share on other sites More sharing options...
Dadinator Posted April 19, 2014 Share Posted April 19, 2014 And throw some of the fiero too. I used to have 2 of them. An 85SE with the 2.8 and an 88 formula. That one was nice. Fun cars. Just needed more power. (Though I say that about most everything) Link to comment Share on other sites More sharing options...
Fierokid87 Posted April 19, 2014 Author Share Posted April 19, 2014 I Lied, I will throw up pictures as soon as I find the best way to do so. And My Fiero started as a 2.8 with the 3speed. I spun a main bearing and didnt wanna rebuild the 2.8, So i bought a Camaro for the 3.4 And installed it, Replaced ALL but the Oil pump.. and that was a Mistake, less than a thousand miles in, my dad and i were on the freeway and all the sudden we could hear it knocking.. So I'm doing it again, but with a 4speed auto, DIS ignition, And what ever else I decide. Its a silver and Black 87 SE. I didnt end up working on the Truck yesterday, My dad and I went to the Junkyard and i grabbed Some tail lights from a Longbed, Cab vents, and some aftermarket Fuse panel. The Drip rails were already removed, but I'm looking for some that I can paint black, I don't want to paint over the Stainless or chrome or whatnot. Ive already removed that off my truck along with the Chrome windshield trim, waiting for a new windshield to be installed with the 97+ Trim. Link to comment Share on other sites More sharing options...
Fierokid87 Posted April 20, 2014 Author Share Posted April 20, 2014 SO i got some pictures tonight, Dad and I got a little progress done also but nothing to report really.Image Not Found Image Not Found Thats the old Door Striker area from when i got it, he had it really mickey moused together.. This is after my dad worked it with what we cut out of a 98 2-Door. Now we gotta do this to the passenger side, its not damaged but, we gotta make it match. Thats my colors black and white. Here is the new front clip And this is the fuse panel i picked up, Does anyone know anything about it? Link to comment Share on other sites More sharing options...
danbyrambler Posted April 20, 2014 Share Posted April 20, 2014 Looks to be a Blue-Sea 5031 http://www.ebay.com/itm/Blue-Sea-5031-St-Blade-Fuse-Block-W-Out-Cover-12-Circuit-W-Negative-Bus-/400687327651?pt=Boat_Parts_Accessories_Gear&hash=item5d4ad369a3&vxp=mtr Where/how did you find the 2500 front? Just curious - I've always an eye out for spare parts jic something happens Keep the pics coming :thumbsup: Link to comment Share on other sites More sharing options...
Fierokid87 Posted April 20, 2014 Author Share Posted April 20, 2014 I found the Conversion front end on Ebay, I knew i wanted one for a while after i found other people doing the swap. So when i saw the front clip with headlights for 500 delivered i couldnt pass it up, Hopefully itl be worth it in the Long run. Sweet, Looks like 5 bucks for that fuse panel was a steal! Link to comment Share on other sites More sharing options...
Fierokid87 Posted April 20, 2014 Author Share Posted April 20, 2014 This is my Fiero. Got it from my dad for 500.. still havent paid him, and the bill keeps getting bigger.. It now has different rims and tires on it, but thats basically it. Link to comment Share on other sites More sharing options...
Fierokid87 Posted April 21, 2014 Author Share Posted April 21, 2014 Didnt get much done today, A little more painting, and ground off the passenger side hinges. Still looking for new hinges to weld on though.. Link to comment Share on other sites More sharing options...
Fierokid87 Posted April 26, 2014 Author Share Posted April 26, 2014 My long arms came in the mail thursday! I started getting that installed, looks like I may end up moving my brake/fuel lines that run down the drivers frame - rail, the upper arm goes right there. I also had to remove some strange brackets that went from the frame to the crossmember. I don't remember seeing them on my dad's cherokee? I'll post pictures up of the massive arms after work today Link to comment Share on other sites More sharing options...
Fierokid87 Posted May 3, 2014 Author Share Posted May 3, 2014 So its been a few days.. ooops. But I got a few more things done on her the past little while, My dad got the passenger side door jamb cleaned up, and welded in the new striker area, and got it almost ready for paint, I got my passenger fender modified and painted, I got my new windshield installed, my 3link axle bracket welded on and painted, Popped a few dents out of the bed, started to get the HID bulbs wired, but i had to cut more of the front of the truck since the bulbs are so long. And i got the new trans crossmember bolted in place, just waiting to weld that in. Pics Its starting to look good, I'm getting excited. And I'm loving that white paint, even with all my finger prints on it. My Crossmember that bolts to the L.A. mounts which bolt and weld to the body. my upper 3link mount for the axle, and my massive and heavy arms You can see the body mounts better in this one.. This is what we started with, previous owner added extra seals, that didnt work. just made a mess. All around the door, Both doors. its double sided foam tape, and then Expanding foam in places.. We drilled out the welds for the old striker backing plate, and got that out of the way. here's the "new" striker, cut from a 98 2door that turned out to be way different than we thought, thought itd be closer than a 4 door because itd have less metal to work with. Got the "new" metal cut down, and starting to cut the old out, making sure to cut as little as possible. getting closer The welds cleaned up for the most part. After a little body filler and lots of sanding, this parts ready for paint, just gotta clean the rest of the crap off. And here's the dent i got to look a little better, put some primer on to prevent rust. had to do something to make a tail light fit, before he had to trailer lights bolted into it, and he butchered the harness. so i gotta make another one of those. I'm hoping to get this together quick, my timeline just got.. expedited. My girlfriend and I are now Engaged, and are getting married in August. So i have a lot to do for that, were looking for a place to rent, and I'm leaning towards a little house or something my toys can come with, but its looking like an apartment. I'm waiting on the L.A. brackets to get welded, and then i should be able to start throwing the axle underneath, and when I do my Fiances little brother will come and help, he wants to learn. I think ill also make him do my intake/exhaust gasket. Things I still NEED to do:Weld L.A. bracketsInstall front axle, after putting all new joints in. - Brayden will help with that. do rear S.O.A. got rear disks to install alsoIntake/Exhaust gasketAll new FluidsWire up the drivers side tail light, Wire the front end and wire for my power doorsFind and weld in new door hinges Something for a front bumper. will probably just put a piece of tube to pass safety for now Things i still WANT to do but probably won't: Build my front and rear bumpers, with hidden winchesRe-do the Engine compartment to make room for my dual yellow tops Roof rack with off-road lights Snorkel, may be needed for dual batteries. Roll cage-Exo cage.. kinda. Link to comment Share on other sites More sharing options...
Fierokid87 Posted May 5, 2014 Author Share Posted May 5, 2014 Picked up an 8.25 and zj rear brakes yesterday for 120. And also got all my hinges. Link to comment Share on other sites More sharing options...
Fierokid87 Posted May 13, 2014 Author Share Posted May 13, 2014 Found 3 different comanches in a Junkyard, 2 LWB, 1 short.. thinking I'll turn the short into a trailer.. probably gonna grab some manche specific stuff along with my tail light harness.. Link to comment Share on other sites More sharing options...
Spectormj Posted May 16, 2014 Share Posted May 16, 2014 comin along good Link to comment Share on other sites More sharing options...
Fierokid87 Posted May 17, 2014 Author Share Posted May 17, 2014 Thanks, it's getting there. I got my lighting wired up, new rear harness made, grabbed both ends of the rear harness plug to make a trailer harness. Got hinges rebuilt and ready to weld in. Have a 8.25 to swap disc's on. Need to figure out wiring the doors up. Getting close. But still so far.. I have till August to get it all done. Link to comment Share on other sites More sharing options...
Fierokid87 Posted July 11, 2014 Author Share Posted July 11, 2014 Well, it's still being worked on, just been busy with getting married and buying a house. Front axle is ready to go under, just have to do doors, weld my cross member, and plumb brakes. It still feels so far. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now