HughMann Posted April 13, 2014 Share Posted April 13, 2014 I got a D44 from a Rodeo. 63" wide with factory 4.78 gears and drum brakes and 6x5.5 bolt pattern.The axle has all stock isuzu mounting brackets on it and the lower radius arms. The axle has larger axle shafts than a normal D44 and the pinion yoke is the same size as a D60. It is a thick ring gear so for lockers it would need a 3.73 and down carrier. Would like to trade for an MJ or XJ d44 or other XJ/MJ width axle like an 8.8 etc. selling/trading because the axle just doesn't fit my needs for the MJ at this time. Axle is located in the Clyde/Waynesville/Maggie Valley area. Would prefer local pick up but can drive to Asheville or Franklin, NC if needed. If you want to see the differences between a normal D44 and the Isuzu D44 here is a thread from pirate about them. http://www.pirate4x4.com/forum/isuzu/603807-definative-tech-thread-1998-isuzu-rear-dana-44-axle.html Link to comment Share on other sites More sharing options...
HughMann Posted June 10, 2014 Author Share Posted June 10, 2014 still for sale/trade Will trade for 8.25 in with 3.55's as well Link to comment Share on other sites More sharing options...
lil_loco Posted June 11, 2014 Share Posted June 11, 2014 To bad your far away. I got an 8.8 ready to go just needs your choice yoke adaptor fresh brake bits (discs etc) and perches. It's geared 3.55 was going to swap it in but I changed my mind. I got it from a MJ build that hit a dead end. It is in the GTA Ontario Link to comment Share on other sites More sharing options...
HughMann Posted June 11, 2014 Author Share Posted June 11, 2014 To bad your far away. I got an 8.8 ready to go just needs your choice yoke adaptor fresh brake bits (discs etc) and perches. It's geared 3.55 was going to swap it in but I changed my mind. I got it from a MJ build that hit a dead end. It is in the GTA Ontario that is how it usually goes. Also the 8.8 is likely 100lbs lighter than the isuzu d44. Link to comment Share on other sites More sharing options...
lil_loco Posted June 11, 2014 Share Posted June 11, 2014 I don't need the 44 just trying to find a home for the 8.8 Link to comment Share on other sites More sharing options...
HughMann Posted June 15, 2014 Author Share Posted June 15, 2014 Added pics. It looks big but that is because my MJ is swb so anything looks big in the bed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.