jamespwsullivan Posted June 26, 2012 Share Posted June 26, 2012 There's an article on one of the forums here that describes how to modify buckets from a 4 dr XJ if I can get a set of these brackets. I'm looking for two pairs--enough to do two buckets. Here's the thread viewtopic.php?f=9&t=16295 Looks like the tilt brackets need to be from a '97 or later XJ 2 door. Thanks Link to comment Share on other sites More sharing options...
75sv1 Posted June 29, 2012 Share Posted June 29, 2012 Have you lloked at the Pick n Pulls in Indy. There are two of them. I was at both about 2-3 weeks ago. A bit thin on latter Cherokees. There were no Comanches at either. Do a seach on Pick n Pull Indy and Pull a Part Indy. I think there was only one latter model Cherokee at Pull a Part. Usually they have some Comanches, but not that time. Tom Link to comment Share on other sites More sharing options...
jamespwsullivan Posted July 2, 2012 Author Share Posted July 2, 2012 Thanks 75sv1 I haven't been to either of the pick your own parts yards yet. I didn't know you cold search on the pick-a-part site. I'll check again. are you located in Indiana? WE might be able to help each other out if we're not looking for the same parts. :-) Link to comment Share on other sites More sharing options...
Recommended Posts