jamespwsullivan Posted June 26, 2012 Posted June 26, 2012 There's an article on one of the forums here that describes how to modify buckets from a 4 dr XJ if I can get a set of these brackets. I'm looking for two pairs--enough to do two buckets. Here's the thread viewtopic.php?f=9&t=16295 Looks like the tilt brackets need to be from a '97 or later XJ 2 door. Thanks
75sv1 Posted June 29, 2012 Posted June 29, 2012 Have you lloked at the Pick n Pulls in Indy. There are two of them. I was at both about 2-3 weeks ago. A bit thin on latter Cherokees. There were no Comanches at either. Do a seach on Pick n Pull Indy and Pull a Part Indy. I think there was only one latter model Cherokee at Pull a Part. Usually they have some Comanches, but not that time. Tom
jamespwsullivan Posted July 2, 2012 Author Posted July 2, 2012 Thanks 75sv1 I haven't been to either of the pick your own parts yards yet. I didn't know you cold search on the pick-a-part site. I'll check again. are you located in Indiana? WE might be able to help each other out if we're not looking for the same parts. :-)
Recommended Posts