drase Posted May 8, 2012 Share Posted May 8, 2012 Need 2 M8x1.25x20 screws that go to the tailgate. They look like this: http://www.lexarindustrial.com/servlet/ ... ead/Detail. I'm kind of anal and would like matching bolts on the tailgate. The above company only sells 350 as the lowest amount, WAY more than I need. Please contact me if you have any or know where any are. Link to comment Share on other sites More sharing options...
500 MJ Posted May 9, 2012 Share Posted May 9, 2012 I can dig when I get home, I think I've got some of these. These are the ones that hold the handle to the tailgate? Link to comment Share on other sites More sharing options...
HOrnbrod Posted May 9, 2012 Share Posted May 9, 2012 Here's some in stainless- http://www.fastener-warehouse.com/index.cfm/product/16884_1398/m8-125-x-20mm-button-head-cap-screw-a2-stainless-steel.cfm EDIT: These are Allen, not Torx heads. :doh: Link to comment Share on other sites More sharing options...
drase Posted May 9, 2012 Author Share Posted May 9, 2012 I can dig when I get home, I think I've got some of these. These are the ones that hold the handle to the tailgate? I'm not sure about the handle as I'm at work right now. But of the 2 I stripped, 1 was from the bottom of the tailgate (it is facing the ground when tailgate is up, and facing bed when tailgate is down) and the other is on the bottom of the sides that holds tailgate to bed. I would really appreciate if you had some non-stripped!! Link to comment Share on other sites More sharing options...
drase Posted May 9, 2012 Author Share Posted May 9, 2012 Here's some in stainless- http://www.fastener-warehouse.com/index.cfm/product/16884_1398/m8-125-x-20mm-button-head-cap-screw-a2-stainless-steel.cfm EDIT: These are Allen, not Torx heads. :doh: Thanks for looking hornbrod, its so hard to find a Torx head! Link to comment Share on other sites More sharing options...
500 MJ Posted May 9, 2012 Share Posted May 9, 2012 I can dig when I get home, I think I've got some of these. These are the ones that hold the handle to the tailgate? I'm not sure about the handle as I'm at work right now. But of the 2 I stripped, 1 was from the bottom of the tailgate (it is facing the ground when tailgate is up, and facing bed when tailgate is down) and the other is on the bottom of the sides that holds tailgate to bed. I would really appreciate if you had some non-stripped!! Ahh, nope I don't have those. The handle is held to the tailgate with three bolts, most of these I have seen are torx head. I have seen a few gates that had hex head bolts here though... Good Luck! Link to comment Share on other sites More sharing options...
Recommended Posts