xander18 Posted April 5, 2012 Share Posted April 5, 2012 My Comanche doesn't appear to have a trailer light plug, though it has a hitch. Before I go tearing into the wiring to pull out signals and brake lights I thought I would check if there's an existing connector in the harness for them that I can jump into instead. Anyone encounter this? Link to comment Share on other sites More sharing options...
Eagle Posted April 5, 2012 Share Posted April 5, 2012 There's possibly a factory connector you can open up and insert a Hoppy harness, but the MJ uses the taillights as combination stop, tail & turn signal lights, just like a simple 4-wire trailer. I just used quick taps to splice into the wires. No logic box adapter needed on the MJ (unlike the XJ). Link to comment Share on other sites More sharing options...
jpdriver1 Posted April 5, 2012 Share Posted April 5, 2012 There's possibly a factory connector you can open up and insert a Hoppy harness, but the MJ uses the taillights as combination stop, tail & turn signal lights, just like a simple 4-wire trailer. I just used quick taps to splice into the wires. No logic box adapter needed on the MJ (unlike the XJ). X2 did this on both of mine ---- Link to comment Share on other sites More sharing options...
xander18 Posted April 6, 2012 Author Share Posted April 6, 2012 Okay, I'll just go ahead and do that. Thanks guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now