skimore11 Posted February 7, 2007 Share Posted February 7, 2007 Alright so I was bored at work and realized I could do 3D in the new CAD program so what am I missing other then mounts for the lights? The brackets show a secondary brace on the front. Otherwise it would be all welded together. Link to comment Share on other sites More sharing options...
86FUBAR Posted February 8, 2007 Share Posted February 8, 2007 Not bad the reciever mount is nice but a winch mount would be better. aproch angle would be good but one good tug using the reciever mount would buckel the whole thing . i think a little triangulatn with a front hoop ,be it a single bend (like a stinger) or a more traditional aproch with a double bend front hoop :brows: Link to comment Share on other sites More sharing options...
87manche Posted February 8, 2007 Share Posted February 8, 2007 I like the brackets, especially how they tie into the front crossemember. Another piece of angle on the bottom and you could tie into the swaybar mounts as well. Any chance I can get a measured drawing of those brackets? I don't like the tube so much, and I thnk you'll taco the middle if you apply any serious snatching force to the receiver. Link to comment Share on other sites More sharing options...
fiscus Posted February 8, 2007 Share Posted February 8, 2007 Is there a difference between the XJ mounting brackets & MJ mounting brackets? I'll have a nice bumper out for sale for XJs soon, but I haven't checked it against my MJ. Link to comment Share on other sites More sharing options...
87manche Posted February 8, 2007 Share Posted February 8, 2007 front bumpers are the same. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now