Preston Posted November 30, 2011 Share Posted November 30, 2011 I have a 1988 jeep comanche 4x4 2.5L and I tore it apart and i need to know how much torque the bolts on the connecting rods. please help! Link to comment Share on other sites More sharing options...
Naterenfo1 Posted November 30, 2011 Share Posted November 30, 2011 Pin Bore Diameter 0.9288-0.9298 in Big End Bore Diameter 2.2080-2.2085 in Side Clearance 0.010-0.019 in Maximum Twist 0.001 in Maximum Bend 0.001 in Connecting Rod Cap Bolts 30-35 ft.lb Hope this helps! :cheers: Link to comment Share on other sites More sharing options...
jimoshel Posted December 1, 2011 Share Posted December 1, 2011 So that's where them things go. I 'm looking at 6 of them laying on the floor while trying to figure out why the engine I just rebuilt doesn't run. Link to comment Share on other sites More sharing options...
Naterenfo1 Posted December 1, 2011 Share Posted December 1, 2011 The diagram is to help make sure the pistons and rods get aligned properly and face the correct direction, you would not believe how many seasoned mechanics have messed this up, and how easy it is to overlook. Link to comment Share on other sites More sharing options...
Preston Posted December 1, 2011 Author Share Posted December 1, 2011 Thanks the diagram helped out a lot! Link to comment Share on other sites More sharing options...
64 Cheyenne Posted December 2, 2011 Share Posted December 2, 2011 Lots of good torque specs here: http://www.torkspec.com/torkspecme.aspx ... L-150ci-S4 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now