Zenobian_84 Posted September 19, 2011 Share Posted September 19, 2011 Not sure if that's exactly what it's called, but I heard that sometimes you can knock it loose when fiddling with installing/removing a radio (thus leading to air not coming out of your vents?) Anybody got a picture of this dubious object, and better yet, how to put it back where it should go? :dunno: Been searching the truck a while and can't seem to locate it. I ask, because this has direct correlation to this thread. Which, is over 2 months I've been without decent blowing air (mostly because I've been to busy/lazy to look more into it) http://www.comancheclub.com/forums/viewtopic.php?f=2&t=31395 Link to comment Share on other sites More sharing options...
JeffN Posted September 19, 2011 Share Posted September 19, 2011 if you pull the radio it should be laying there if you knocked it off, there are a few vacuum lines in the block, hard to miss Link to comment Share on other sites More sharing options...
ParadiseMJ Posted September 21, 2011 Share Posted September 21, 2011 I refer to my post in the linked thread. Try a smoke test Link to comment Share on other sites More sharing options...
gl1200aman Posted September 21, 2011 Share Posted September 21, 2011 It sounds like you are talking about the vacuum cluster/connector on the backside of the heater control. it doesn't have to be completely out to not work. It can be partially dislodged/disconnected and not work because of the gap between the two pieces. You can see all the vacuum lines connecting to the plastic connector, just push it in and make sure it is completely seated. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now