Problem ?

[jeepman 87]

Has anyone ever had a problem with classic 2 current? I just wanted to ask because I ordered floor pans and rockers on Saturday and the way there shipping is it's supposed to be next day, that's why so much, but what I'm after is that they still have not even sent my stuff not even got it together, so has anyone else had problems :hmm:

[xjrev10]

out of stock :hmm:

 

call them.

 

please let us know the verdict!

[terrawombat]

I ordered a drivers front pan made by Classic 2 Current but sold by RockAuto. I went with RockAuto over buying direct from the manufacture because I had heard of them being a little bit slow. And, if I didn't get the pan in a timely fashion, I could have complained to RockAuto and they probably would have given me a 15% discount coupon code (they gave this to me when I complained that they sent the wrong part to me). Not sure if Classic 2 Current would have done the same for me...and I don't anticipate ordering too much from them whereas I place an order with RockAuto at least once a month.

[xjrev10]

I ordered a drivers front pan made by Classic 2 Current but sold by RockAuto. I went with RockAuto over buying direct from the manufacture because I had heard of them being a little bit slow. And, if I didn't get the pan in a timely fashion, I could have complained to RockAuto and they probably would have given me a 15% discount coupon code (they gave this to me when I complained that they sent the wrong part to me). Not sure if Classic 2 Current would have done the same for me...and I don't anticipate ordering too much from them whereas I place an order with RockAuto at least once a month.

 

The pan was a direct fit?

[terrawombat]

It fit decent but you must pop the top of the frame rail off that runs along the inside ofthe cab if you want any chance at all if it fitting.

[jeepman 87]

Called classic 2 curent and instead of letting me know they waited till I got ahold of them. But anyways the fedex guy bent a floor pan and they have no more for a couple days they say, so my wife is peed off cause we ordered them on Saturday and paid alot in shipping and won't get parts till next week, also my wife called them three times today to see if any progress and noone would answer, almost ready to get money back and go elsewhere

[87Warrior]

I had no issues ordering straight through C2C. Though, my body shop guy was real disappointed in the fit of the pans. They are made out of good material.

[terrawombat]

I ordered the front drivers pan for my MJ and the fit was decent, but not great. It required a couple of additional cuts to get it to fit the contour around the transmission tunnel. Also, there is a support piece that goes from the rocker panel to the frame rail on the MJ (the XJ does not have this...at least my '99 and '01 XJs don't). The floor pan wasn't really formed correctly to fit that and the pan seems to sit about 1/4" to 1/2" above it.

 

When I get internet back at my shop, I can better show you with pictures.

 

Other than what I listed, it fit fine and was made out fairly thick steel. It was a HECK of a lot better than the Fred Flinstone MJ I had before.