Jump to content

jeepman 87

Members
  • Posts

    136
  • Joined

  • Last visited

Everything posted by jeepman 87

  1. jeepman 87

    brackets

    In need of a set of brackets for the bucket seats for an 89 mj for a reasonable price
  2. What size are the bolts (for the short bed) to mount the roll bar
  3. Just checked lights still blowing fuse but tail lights really really dim but rear harness still warm
  4. But why would my rear harness and plugs get hot
  5. Thanks I'll try those things
  6. My 89 mj just lost parking lights, iput a new fuse in and it melts, changed light switch and cleaned ground but no go can anyone help and also my rear harness gets real warm
  7. Is the pipe after the header the same on a mj and a xj (same year)
  8. jeepman 87

    Code

    What is the code to get discount from 4wd hardware
  9. Are mj and xj speedo cables different? My 89 mj started life as a 2wd and now I've made it 4wd and has cruise but now I need a longer cable. I ordered one for an xj but the end won't fit transfer case to small
  10. Where is a good place to get a set of gears
  11. I have an 89 mj with an 8 inch lift and 35's. I'm looking at gears but I want to drive on road but also have fun on trails and mud. What size gears should i use
  12. Is there anywhere I can get a Speedo cable for my 89 mj with cruise (4x4) auto np 231
  13. jeepman 87

    Speedo Cable

    I have an 89 comanche with cruise and I'm installing an 8 inch long arm lift but my truck was 2 wheel drive and now I'm in need of the Speedo cable from cruise control back to transfer case
  14. What size is the nut on the Pittman arm
  15. I do have stock plates, the axle came out of a 87 comanche now in a 89 but my shocks won't mout to the axle they hit the axle before theyget to the sruds
  16. Just got my danna 44 metric ton rear end swap done but my shocks won't mount onto the axle. What do I need to do with axle shock mounts? Can you just swap bottom brackets to each side?
  17. I've got a 4x4 aw4 tranny to do a 4x4 swap but couldn't get torque converter (motor froze) but can I use my converter from my 2 wheel drive aw4
  18. Another in plymouth IN 89 eliminator
  19. jeepman 87

    Need

    Rear bumper
  20. What do you call the piece you bolt the seat to that's wellded to floor board and is there somewhere I can buy one
  21. Are all heater core boxes the same or are the ones with or without ac different
  22. Can you put new cable in it or is it no good if cable broke? And also what size spare will fit under truck
  23. jeepman 87

    Bumper

    Sorry we all had to fight for it but I really needed it, my bumper on there now has more waves than the sea
  24. jeepman 87

    Bumper

    Sorry the bid for the Comanche rear bumper on eBay, that's what I won today
  25. jeepman 87

    Bumper

    I won the bid for the bumper ( at least it went to a cc member ) it was alittle much but you can't find any and it was the last thing on my list. I have an 89 eliminator 2wd right now but I just picked up a Dana 30 out of a 99 xj, my parts truck is an 87 metric ton so I have a Dana 44 for it. Also new 97+ fenders 97+ doors and a factory roll bar, plus just had rockers and floorboards installed
×
×
  • Create New...