koooooooz Posted January 4, 2007 Share Posted January 4, 2007 aight guys i can't even explane how dumb i am when i was tightning up one of my oil pan bolts after puting seelent on it well the head snaped off how can i get it out plz help Quote Link to comment Share on other sites More sharing options...
88swampedmj Posted January 4, 2007 Share Posted January 4, 2007 the head of the oil pan bolt?? iam thinkin get some bolt extractors... then a new oil pan bolt haha Quote Link to comment Share on other sites More sharing options...
jbhill Posted January 4, 2007 Share Posted January 4, 2007 hmm i hope you put a gasket on there. pull pan back off and if it didnt break flush, use some vise grips and back it right out. Quote Link to comment Share on other sites More sharing options...
sinnaevd Posted January 5, 2007 Share Posted January 5, 2007 get an easy out bit brill a tiny hole in, hammer the bit in and turn it out. worked like a champ on the water pump (it was broke flush and corroded in) Quote Link to comment Share on other sites More sharing options...
koooooooz Posted January 6, 2007 Author Share Posted January 6, 2007 well i got it out thanks 4 the help Quote Link to comment Share on other sites More sharing options...
BLHTAZ Posted January 6, 2007 Share Posted January 6, 2007 well i got it out thanks 4 the helpGlad to hear it. I think that has happened to all of us at least once...and a lot of us more than that :D . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.