kro10000 Posted May 26, 2011 Share Posted May 26, 2011 I've been having an off idle hesitation problem, checked the tps and it read 0.8v closed, and 4.65 WOT. I tried adjusting it but couldn't get higher than 4.8v. It does have a good 5v going to it. Would this be enough to be a concern and the tps to be bad? Also if this couldn't cause the hesitation, what else would be good to check? Thanks! Ps its the mj in my sig, renix 4.0 Link to comment Share on other sites More sharing options...
kro10000 Posted May 27, 2011 Author Share Posted May 27, 2011 Bump? Link to comment Share on other sites More sharing options...
cz777 Posted May 28, 2011 Share Posted May 28, 2011 i had almost the same thing ...i reset the tps to .830 and cleaned [1.take the nut off with sand paper clean the loops off next coat the loops with never seize and no-ox with a star washer between the loops ..use of lock washer outside ]the the ground connection near the dip stick mount .. all ground connections cleaned/coated the same way ..now no more troubles Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now