1999MJ Posted December 24, 2006 Posted December 24, 2006 Any one on here running rustys 4" rear springs and a spring over? If so how much lift did you get total. Do rustys springs give you a true 4" or is it a bit more? How do the springs flex?
Oizarod115 Posted December 24, 2006 Posted December 24, 2006 CWlongshot has rustys 4" and chevy 2" drop shackles (iirc) so he could probly tell you what the springs alone gave him... add abuot 5.5" to that.
Southen Crawlin Posted December 24, 2006 Posted December 24, 2006 one guy up here with a lwb mj had them on and spring over. he said they were more like 3in lift springs but their flex is insane. ill buy a set once i have some $$$, christmas has put me in the poor house.
feerocknok Posted December 24, 2006 Posted December 24, 2006 one guy up here with a lwb mj had them on and spring over. he said they were more like 3in lift springs but their flex is insane. ill buy a set once i have some $$$, christmas has put me in the poor house. CW was saying they gave more than the advertised lift, and a few hours ago I put up a post on his thread asking if he could measure. That'd be one tall MJ!
CWLONGSHOT Posted December 24, 2006 Posted December 24, 2006 They gave me more than 4" for sure. I have severly chopped my fenders so measuring with a common referance is difficult. I have added, 4.5" coils as well as 2" spacers AND .75" spacers up front and its looks about perfect to me. Front sits 1.5" LOWER than rear. The rear is spring UNDER, 4" Rustys packs and 7" shackles. Tell me where you would like me to measure or photograph and I would be happy to oblige.... Merry Christmas, CW
1999MJ Posted December 24, 2006 Author Posted December 24, 2006 They gave me more than 4" for sure. I have severly chopped my fenders so measuring with a common referance is difficult. I have added, 4.5" coils as well as 2" spacers AND .75" spacers up front and its looks about perfect to me. Front sits 1.5" LOWER than rear. The rear is spring UNDER, 4" Rustys packs and 7" shackles. Tell me where you would like me to measure or photograph and I would be happy to oblige.... Merry Christmas, CW Can you get me a measurment from the axle centerling to the top of the bed rail. I would also like to see how much you cut out of your wheel well if it's not to much trouble. Thanks and Merry Christmas
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now