86ComancheXNate Posted March 22, 2011 Share Posted March 22, 2011 Its from a wagoneer. would that fit under my truck? http://ocala.craigslist.org/pts/2253509747.html Link to comment Share on other sites More sharing options...
Rockyrider367 Posted March 22, 2011 Share Posted March 22, 2011 It will go in with some work. Thats what I have in the front of mine. If you want to keep the factory front suspention with coils and links you will need to fab up some mounts or buy some as I did. Aslong as it is not a wide track the width is perfect and you also have to make sure it is drivers side drop for the dif. Some of the waggys came with both. And just remember that the waggys are a 6 lug not a 5x4.5. Hope that hels you. Link to comment Share on other sites More sharing options...
Eagle Posted March 22, 2011 Share Posted March 22, 2011 What do you mean by "fit"? Anything can be made to fit, with sufficient infusions of time, labor and money. If you're asking if you can just bolt it in -- no. Link to comment Share on other sites More sharing options...
mvusse Posted March 22, 2011 Share Posted March 22, 2011 It is almost the same width as your D30. Depending on year it might be passenger or driver drop. If it is the correct side (driver), then you have to decide whether your going to adapt the axle to use the 4 link/panard bar coil spring suspension, or adapt your truck to use the axle's leaf spring suspension. Wheel bolt pattern is different also. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now