JCole Posted February 18, 2011 Share Posted February 18, 2011 Ok guys made my perches, now what angle should I set the pinion angle at for a 89 sb 4x4 comanche using stock springs? Thanks. Link to comment Share on other sites More sharing options...
64 Cheyenne Posted February 18, 2011 Share Posted February 18, 2011 http://www.pirate4x4.com/tech/billavist ... ndex2.html Link to comment Share on other sites More sharing options...
87Warrior Posted February 18, 2011 Share Posted February 18, 2011 I assume you will continue to use the stock 2-joint shaft. Set the pinion angle at the same angle as the output shaft of the t-case. If you are running a CV shaft then you will need to set the pinion angle at the same angle as the driveshaft. Link to comment Share on other sites More sharing options...
Pete M Posted February 18, 2011 Share Posted February 18, 2011 don't forget to replace your u-joints. :thumbsup: they don't like changes in their operating angle and can cause vibrations. Link to comment Share on other sites More sharing options...
JCole Posted February 18, 2011 Author Share Posted February 18, 2011 Thanks guys. I would be lost without you guys :waving: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now