89flat Posted February 4, 2011 Share Posted February 4, 2011 comanche drivelines from and 89 with the following drive train: 2.5L,AX5,NP231, and dana 30 and 35, the rear has new precision ujoints and the front has a new axle joint with a double cordone joint at the tcase, all in good condition and well balanced font has slip splines and the rear is regular slip yoke these are made for a comanche with 4-5 inches of lift,i will post pics soon, id like 50 each or both for 75 Link to comment Share on other sites More sharing options...
skidoo_j Posted February 4, 2011 Share Posted February 4, 2011 Where in washington are you? I'm interested in the front for sure, maybe rear. I put a 4.5" lift on the truck, but swapped the 35 for a 44 when did the soa so i don't think rear needs to be replaced. Could you email me photos and lengths Link to comment Share on other sites More sharing options...
89flat Posted February 4, 2011 Author Share Posted February 4, 2011 i will take pics this weekend and i will measure for you i can't remember off the top of my head and i am in snohomish Where in washington are you? I'm interested in the front for sure, maybe rear. I put a 4.5" lift on the truck, but swapped the 35 for a 44 when did the soa so i don't think rear needs to be replaced. Could you email me photos and lengths Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.