dakal Posted November 30, 2010 Share Posted November 30, 2010 i am hunting a miss in my 1988/4.0. after trying lots of ideas, my mechanic wants to try a coil/ecu. the junk yards around here are crooks so i turn to you. does someone have a renix one they would send me so i could check mine? we could work out a price before hand. if mine is good, i'll send yours back +. if not i'll send you payment. THANKS dave Link to comment Share on other sites More sharing options...
500 MJ Posted December 1, 2010 Share Posted December 1, 2010 Is this what you are talking about? The ignition control module? http://www.rockauto.com/catalog/x,carco ... ttype,7060 I've been there, done that on my '90. I was having issues starting mine and I could not figure it out, finally replaced this and things have been great since. If I'm going to ship one of my spares off, I'm not looking to get it back. It's either mine or yours. Let me know if you are interested. $15 shipped. I'll test it and verify that its good before I shoot it out to you. It'll be in the mail the day I get payment. - Brent Brent Marsh 1986 Wendt Road Fitchburg, WI 53575 414-750-6433 Link to comment Share on other sites More sharing options...
Geonovast Posted December 1, 2010 Share Posted December 1, 2010 The one in my 88 XJ went bad from sitting. After a decent amount of searching, I found I was able to do a quick test with a multimeter. Set it to read ohms, and touch the positive to the positive post where the plug goes, and negative to the terminal for the plug wire. Should be less than 1 ohm. Mine was 13. Link to comment Share on other sites More sharing options...
dakal Posted December 1, 2010 Author Share Posted December 1, 2010 yah i did mean ign module. senior moment. http://www.rockauto.com/catalog/x,carco ... ttype,7060 I've been there, done that on my '90. I was having issues starting mine and I could not figure it out, finally replaced this and things have been great since. If I'm going to ship one of my spares off, I'm not looking to get it back. It's either mine or yours. Let me know if you are interested. $15 shipped. I'll test it and verify that its good before I shoot it out to you. It'll be in the mail the day I get payment. - B the coil is on top and the ign module on the bottom. i will try the multimeter thanks dave Link to comment Share on other sites More sharing options...
500 MJ Posted December 5, 2010 Share Posted December 5, 2010 Got your check yesterday. Sending the tested & checked ignition control module out in tomorrow's mail. Thanks - Brent Link to comment Share on other sites More sharing options...
dakal Posted December 5, 2010 Author Share Posted December 5, 2010 thank you Link to comment Share on other sites More sharing options...
Recommended Posts