Jump to content

'98 HO overheat/won't start... possible problems?


Recommended Posts

My donor XJ ('98 4.0 AX-15/NP231) that i got for cheap 'cuase the PO said it needed a new engine, cranks but doesn't run. The story was that it overheated... needs rebuilding.

 

My question is, what is the most likely culprit? Warped/cracked head? Blown head gasket? something worse? I haven't drained fluids or taken anything apart on the engine because I bought it for the trans/t-case and all the other goodies for my MJ. Oil is full and looks clean, coolant overflow bottle is full and a bit dark in color with a rainbowy film on top of the coolant. Rad is low, ie: dry up at the cap/neck. If it's not that big of a fix I might do an HO swap with it down the road. I already stole the drivetrain so I couldn't start it if I wanted to.

 

Any ideas?

Link to comment
Share on other sites

  • 2 weeks later...
If the top of the coolant is rainbowy, there's oil in it.

I figured. I can't do any trouble shooting now, as I've taken the tranny off (no cps). I'll probably just pull the head and have a look.

 

Thanks.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...