MjPioneer Posted October 7, 2010 Share Posted October 7, 2010 I'm looking for a d35 for a buddy and hopefully somebody here is hording some for cheap. Gear ratio doesn't matter, would prefer the axle to be complete drum to drum just to make it easier for us. Thanks Link to comment Share on other sites More sharing options...
Geonovast Posted October 7, 2010 Share Posted October 7, 2010 Just out of curiosity, why does gearing not matter? Also, does it matter what it's out of? Link to comment Share on other sites More sharing options...
MjPioneer Posted October 7, 2010 Author Share Posted October 7, 2010 It doesn't totally matter what it is out of I prefer a Mj/Xj to make the install a little bit quicker. The gearing doesn't matter because the person this is for has a set of 3.55 he wants to put in before he gives the rig to his daughter for her first car. The thing won't ever be abused (well actually it only has to survive a teenage girl) odds are it won't hit the dirt/be ever lifted/ ever go into 4x4. Link to comment Share on other sites More sharing options...
sinkrun Posted October 8, 2010 Share Posted October 8, 2010 xj-mj are the same width but ones spring under the other spring over if its not out of what your putting it in you will have to weld new perches on. Link to comment Share on other sites More sharing options...
mjtjnj Posted October 8, 2010 Share Posted October 8, 2010 PM'ed you, I have one in NJ in good shape, 4.10's. $125 Link to comment Share on other sites More sharing options...
Recommended Posts