heralue Posted October 21, 2006 Share Posted October 21, 2006 Will a DANA 30 from an XJ 1989 with 3,55 an w/o disconnect fit on my MJ with bad disconnect ?? Link to comment Share on other sites More sharing options...
whowey Posted October 21, 2006 Share Posted October 21, 2006 Absolutely, and it would be a 'bolt-in'. All of the brackets are the same, and in the same places. Link to comment Share on other sites More sharing options...
MJ88User Posted October 21, 2006 Share Posted October 21, 2006 yes it works, I've done this on my 88. You need to make sure the front ratio matches the rear ratio. The non-disconects has a stamped metal bushing suport for the control arm, some have stated that this is a weaker support than the one on the disconect axle. Some have just swapped the inner shafts but it that takes a diferent seal, if you search around on the side here you might be able to come up with all the parts and maybe even a writen step by step instruction list. I can't point you to one but maybe someone else has a link or something they could post up. Link to comment Share on other sites More sharing options...
87manche Posted October 23, 2006 Share Posted October 23, 2006 www.madxj.com it's under axle, it has part numbers and step by step on putting the non-disco shafts in the disco axle. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now