Jump to content

Chipped/melted piston


Recommended Posts

So we were pulling apart the 4.7L stroker from my brothers TJ and found this in one of the cylinders, a chunk is missing from one of the pistons and there are no marks on the wall from it :???:

 

 

Besides random detonation in just one cylinder I can't imagine how this could happen

Link to comment
Share on other sites

If your tearing the engine apart then replace the piston. If you just want a cheap, quick fix, polish the rough edges off the missing chip. While your at it polish the rough, pitted edge at the 2-3 O'Clock position. Rough edges get hot leading to detonation. Also gives carbon a place to build up. If I were doing it, I would replace the piston.

Link to comment
Share on other sites

We plan on replacing the piston, I'm just trying to figure out how this could happen to a 35,000 mile motor

Is he running platinum tip spark plugs? The tips can come off, and when they do they tend to break things inside the engine -- like pistons.

 

I won't run platinum plugs. I use only standard NGKs, and they run fine in all my Jeeps.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...