hi lift mount

[DansGreyMj]

where did u guys put urs?

I'm thinking of buying an in bed tool box(i kinda need one) and mounting the jack to the lid so it doesnt take up any space( of course i'll seal it so it won't leak) but what do u guys think

[comanchedude]

I think thats a good idea,I may do the same

[BrettM]

you likely won't get a 60" to fit. I need a 60" with my amount of lift and suspension travel. I welded some little risers at the back of my bed with bolts sticking up, then I used fender washers and wingnuts to clamp it down. I also used swaybar bushings to keep it from rattling.

 

[Pete M]

It's probably not applicable to most trucks, but I bolted my hilift to my rollbar.

 

 

[CWLONGSHOT]

I mounted mine to the bed behind the cab. I used the hi lift mounts and SS bolts.

 

 

CW

[87manche]

before I took the toolbox out of mine I was going to mount a hi lift to the back of it, like CW did to his bed.

Dan, I don't know where you're at, but I've got two toolboxes sitting in the driveway I need to get rid of.

[DansGreyMj]

before I took the toolbox out of mine I was going to mount a hi lift to the back of it, like CW did to his bed.

Dan, I don't know where you're at, but I've got two toolboxes sitting in the driveway I need to get rid of.

 

 

I'm near nashville it might not be worht it to drive to ohio to get a toolbox I'm just gonna get a black one at pepboys they seem to have the best prices

[Derek]

my 60" fits inside my tool box without the top piece on it

keeps it dry and out of the weather