Automan2164 Posted October 17, 2009 Share Posted October 17, 2009 Someone in CL land is trying to tell me this is an aftermarket header... Looks stock to me. What do y'all think? Rob L. Link to comment Share on other sites More sharing options...
HOrnbrod Posted October 17, 2009 Share Posted October 17, 2009 I've seen that header before - escapes me now. :hmm: Don't all stock exhaust manifolds have the O2 bung?? Link to comment Share on other sites More sharing options...
Automan2164 Posted October 17, 2009 Author Share Posted October 17, 2009 He's asking $40, but I don't want to jump into anything... He said there are no markings on it, and I would like to know who made it before I buy it. Rob L. :dunno: Link to comment Share on other sites More sharing options...
Boilermaker Posted October 17, 2009 Share Posted October 17, 2009 Looks like an APN header here's a picture from jeepstrokers of the APN and OEM header, side by side (more or less) There's also some good info about the header in the thread a few posts from the top, so here's a link to it: http://www.jeepstrokers.com/forum/viewt ... ?f=8&t=111 Link to comment Share on other sites More sharing options...
HOrnbrod Posted October 17, 2009 Share Posted October 17, 2009 I think this is it Rob - an HO header, only maybe not stainless. I have a pic buried somewhere in my archives; still looking. http://www.jeep4x4center.com/product-information.asp?number=17650.01# Link to comment Share on other sites More sharing options...
Automan2164 Posted October 17, 2009 Author Share Posted October 17, 2009 He DID say it was stainless, but used... Looks like it has seen better days, but for $40? I don't think I should pass that up. Little polishing, and some paint, would be a good deal... Thanks fellas! :yes: Rob L. Link to comment Share on other sites More sharing options...
HOrnbrod Posted October 17, 2009 Share Posted October 17, 2009 Agree. :thumbsup: Link to comment Share on other sites More sharing options...
WBKrazy Posted October 17, 2009 Share Posted October 17, 2009 :smart: i agree as well... for $40 as long as it doesn't leak thats a good deal, there quite a bit more than that new... Link to comment Share on other sites More sharing options...
Automan2164 Posted November 27, 2009 Author Share Posted November 27, 2009 Well, FINALLY got a chance to get out to the guys house... Picked it up for $40 still. Looks to be in decent shape... There is a crack, but doesn't looked carboned up... I don't think its through, but might give it a little TLC with the welder before hand. Aftermarket on left, OEM right. Aftermarket. OEM. Little polishing, and maybe some ceramic coating, and it will be good as new. :thumbsup: Rob L. Link to comment Share on other sites More sharing options...
CWLONGSHOT Posted November 28, 2009 Share Posted November 28, 2009 It looks an aweful lot like the BANKS on my TJ...Cannot find a pic... CW Link to comment Share on other sites More sharing options...
Automan2164 Posted November 28, 2009 Author Share Posted November 28, 2009 CW, I think you are right... Banks: Mine: Sweet? Rob L. Link to comment Share on other sites More sharing options...
Automan2164 Posted November 29, 2009 Author Share Posted November 29, 2009 Leave it to JeepcoMJ... :roll: : Flow Daddy header, spot on match. Looks like everyone on NAXJA say its just as good as the APN. Rob L. Link to comment Share on other sites More sharing options...
JeepcoMJ Posted November 29, 2009 Share Posted November 29, 2009 :P looks like the only difference is between the two collectors to the downpipe section...looks like yours has been repaired in there, or maybe it's just a flaw in their earlier brands? either way, that's a $250 header for $40. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now