1999MJ Posted June 27, 2009 Share Posted June 27, 2009 Just picked up a 2wd LWB eliminator and was thinking about going a diferent route with it. A nice driving street truck. Any one have a picture of a custom rollpan or a pan from another truck they have addapted to fit the MJ? Link to comment Share on other sites More sharing options...
mnkyboy Posted June 27, 2009 Share Posted June 27, 2009 here's mine,i made it from a stainless steel corner cap from a pace cargo trailer. Link to comment Share on other sites More sharing options...
HOrnbrod Posted June 27, 2009 Share Posted June 27, 2009 I would think one for a 93 and below S10 would almost be a bolt-on for the MJ. There are plenty of these on Fleabay and elsewhere. Link to comment Share on other sites More sharing options...
1999MJ Posted June 28, 2009 Author Share Posted June 28, 2009 i was thinkinh the same thing. Any one own an S-10 to take a measurment Link to comment Share on other sites More sharing options...
Automan2164 Posted June 28, 2009 Share Posted June 28, 2009 I had a buddy who cut, and flush mounted a front bumper in the back, between the bedsides. Looked pretty trick. Rob L. Link to comment Share on other sites More sharing options...
cromanyak Posted June 28, 2009 Share Posted June 28, 2009 Here's one i made just out of sheetmetal. Its nothing fancy, but I like it. Link to comment Share on other sites More sharing options...
1999MJ Posted June 28, 2009 Author Share Posted June 28, 2009 Here's one i made just out of sheetmetal. Its nothing fancy, but I like it. nice job. I'm not looking for anything fancy either. Do you have a better shot of it from the back? We have a sheet metal brake and sheer at my work and I may just end up going that route any way. Link to comment Share on other sites More sharing options...
cromanyak Posted June 29, 2009 Share Posted June 29, 2009 I'll take some better pics and post them. If you have a break you could make one no problem. I actually used the rounded part of the top of the tailgate to form it, and the edge of my work bench to make the sharper bends. Then i took some 1/8 inch plate about 1 inch wide and welded it to the bottom lip to make it more rigid. I used the same plate to make the sides. Its pretty sturdy. Link to comment Share on other sites More sharing options...
jbhill Posted June 29, 2009 Share Posted June 29, 2009 siiick. i know grant kustoms in cali said if made em some templates n measurements they would make me one... Link to comment Share on other sites More sharing options...
cromanyak Posted June 29, 2009 Share Posted June 29, 2009 There's really nothing to it if you have a mig welder. I think it cost me about 50 in materials, and took about a day and half. If you actually had equipment for bending metal it'd be even faster. You just gotta take your time working the metal. Mine is actually not at nice as it appears, but i'm happy with it. Plus white hides alot of the imperfections. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now