jeep_freek88 Posted April 13, 2009 Posted April 13, 2009 Ok people I am about to put a wiring harness with a fuse block in my truck..... just looking for helpfull hints and encouregment ........it looks like a pretty hard job to do.... advise please :dunno:
mjeff87 Posted April 13, 2009 Posted April 13, 2009 gut the interior, and this includes the carpeting/cargo mat, seats, B and C pillar trim. You can get by with partially removing the dash assembly, but it also has to come unbolted so you can rock it forward to access the harness running behind it. Have fun :cheers: Jeff
ren Posted April 13, 2009 Posted April 13, 2009 Realize that there ARE going to be moments when you need to back off, and cool down before you tackle it again. Don't be afraid to take breaks or ask some else to give it a shot. Take your time.
JeepcoMJ Posted April 14, 2009 Posted April 14, 2009 gut the interior, and this includes the carpeting/cargo mat, seats, B and C pillar trim. You can get by with partially removing the dash assembly, but it also has to come unbolted so you can rock it forward to access the harness running behind it. Have fun :cheers: Jeff That actually depends on what he's replacing, with what. Okay, to the original poster. what exactly are you replacing? with what? are you just replacing the fuse box? just dash harness? have you cut any wires? is it a complete harness swap? is the new harness from a cherokee or comanche? -Pat
jeep_freek88 Posted April 14, 2009 Author Posted April 14, 2009 it's a complete harness swap (MJ) :waving: Jeff and it's from a mj so am I going to have to remove the dash completly? :eek:
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now