clarkerussell Posted July 10, 2006 Share Posted July 10, 2006 I know there is some fab work to do to make the door catches work, but do the door creases line up to the rest of the truck? I parked next to a Classic and I couldn't visualize them lining up with the B pillar and the front fenders. Thanks. Link to comment Share on other sites More sharing options...
feerocknok Posted July 10, 2006 Share Posted July 10, 2006 As long as it's a 4 door, they will. It's not actually fabrication that's needed for the latches either. I believe it's just unscrewing the cab side piece from the donor, and screwing it higher up on your MJ. Link to comment Share on other sites More sharing options...
clarkerussell Posted July 10, 2006 Author Share Posted July 10, 2006 As long as it's a 4 door, they will. It's not actually fabrication that's needed for the latches either. I believe it's just unscrewing the cab side piece from the donor, and screwing it higher up on your MJ. What about the door panels? Can to old ones be reused, or do you need to use the new ones? If so, is there a problem with them integrating with the old dash? Link to comment Share on other sites More sharing options...
DirtyComanche Posted July 10, 2006 Share Posted July 10, 2006 The new interior doesn't match much of the old. Try it and see... Link to comment Share on other sites More sharing options...
clarkerussell Posted July 10, 2006 Author Share Posted July 10, 2006 The new interior doesn't match much of the old. Try it and see... That's what I thought. What are most people doing about the interior panels if they use the new style doors? Has it been done? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now