Jump to content

Can 1990 XJ 4.0 brake rotors and Pads fit


Recommended Posts

1990 was the first year for the second generation of the XJ/MJ front brake system. The knuckles, rotors and calipers are ALL different from previous years, IIRC. I don't know if the pads might be the same, but if the calipers are different I rather doubt it.

 

Here's the Cliff's Notes capsule summary of what fits:

 


  • · Only two steering knuckle designs were used: 1984 through 1989, and 1990 through 2001. Left and right side knuckles are different part numbers within each group.
     
    · Three different hub/bearing units were used. The hub/bearing units are the same for both sides of the vehicle. The different years for hub/bearing assemblies were: 1984 through 1989; 1990 through mid-1999 (composite rotors); and late-1999 through 2001 (cast rotors).
     
    · Three rotor types were used: 1984 through 1989; 1990 through mid-1999 (composite); and late-1999 through 2001 (cast).
     
    · Only two caliper types were used: 1984 through 1989, and 1990 through 2001. Left and right side calipers are different part numbers within each group.

The above is copyrighted and may NOT be reproduced or distributed. You may print out one copy for your own, personal use.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...