bigmerc34 Posted December 5, 2008 Share Posted December 5, 2008 Hello jeepers I have a ?, I just put a trans case in that jeep it had a 207 in it and I put a 231 in it on the trans case itself does 2h go to the front of the truck and 4l to the back with the linkage if so I have it right but when I start the truck the 4wheel light lights up on the dash why is that ?? :nuts: :dunno: Link to comment Share on other sites More sharing options...
Pete M Posted December 5, 2008 Share Posted December 5, 2008 The 4wd light is triggered by vacuum. It doesn't necessarily mean the t-case is actually in 4wd. Are you sure the vacuum lines are all in the right spot? Did you properly adjust the linkage? Link to comment Share on other sites More sharing options...
bigmerc34 Posted December 6, 2008 Author Share Posted December 6, 2008 The jeep had a 207 t-case in it and it went bad was hard for me to find a 207 so I put a 231 in it and on the 231 it had 2 lines for vacuum on the t-case mine had 4 lines so I had to change it but I don't know if I put it back on the right way have to look but I'll try that and thanks alot again Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now