lilredtruck Posted November 18, 2008 Share Posted November 18, 2008 I got a 1990 fuel injected 4.0L and I need to know what the fuel pressure is at the fuel rail. does anyone know where I can get a wiring description of the firewall (bulkhead) connector for an '86 Comanche? I need to know where all the wires go in the engine compartment. It's nice to be a member of the club - now I just have to get the little guy running, with your help. Ron Link to comment Share on other sites More sharing options...
bigd44889 Posted November 18, 2008 Share Posted November 18, 2008 not sure what it is soposed to be at the rail but the pump runs at 90 to 110 so i wold guess around 45 at rail my 2.5 pump is 35 to 45 and only 14.5 at fuel injector just a informed guess nobody yell at me lol Link to comment Share on other sites More sharing options...
lilredtruck Posted November 18, 2008 Author Share Posted November 18, 2008 You're pretty close I'd guess. I've been given responses on other boards from 25psi to 39 psi and another again at 50psi. I'm going to go with the middle one of 39 psi - I know for a fact that my elec fuel pump that I was using on my LT-1 put out at least 45psi to run it, so it should handle up to fifty if necessary. Thanks for your input... Still could use the breakdown on the Firewall connector if anyone has that. Thanks, Ron Link to comment Share on other sites More sharing options...
BLHTAZ Posted November 18, 2008 Share Posted November 18, 2008 Go here and download the FSM that I have linked there... viewtopic.php?f=9&t=12517 It will have all the info you need about that :cheers: Link to comment Share on other sites More sharing options...
lilredtruck Posted November 18, 2008 Author Share Posted November 18, 2008 Hey Taz, You're everywhere... Now you have an MJ!!!? You may know me as BuddyOvrlnd elsewhere... Now I'm working on the lilred(pickup)truck. How've you been? Link to comment Share on other sites More sharing options...
BLHTAZ Posted November 18, 2008 Share Posted November 18, 2008 :cheers: Hey man...long time no talk. Yeah...I don't go over "elsewhere" much any more as I had a bit if a disagreement with "management" there. Ya, I have had the MJ now for nearly two years... Link to comment Share on other sites More sharing options...
Jeepman Posted November 18, 2008 Share Posted November 18, 2008 39PSI for all 4.0L with a Fuel pressure regulator on the rail (you will have 2 lines on the rail)... 49PSI for 4.0L with the Regulator at the tank (you will only have 1 line at the rail)... A subscription to alldata may help with the electricall diagrams... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now